Mean Sea Level Pressure Calculator (Converter) – Advanced Formula
/QUESTION: How to compare atmospheric pressure from weather stations at different locations and elevation above sea level?
Convert your weather station barometric pressure accurately to Mean sea-level pressure using this calculator.
ANSWER: To compare pressure conditions around the world, meteorologists recalculate the barometric pressure measured by weather stations to mean sea-level conditions. For this calculation, accurate elevation above AMSL (Above Meab Sea Level) for each weather station is required.
Higher placed weather stations naturally have lower atmospheric pressure since the column of air above them is less high. At higher altitudes air pressure decreases. Since air pressure decrease due height above sea level is roughly equivalent around the world, barometric pressure readings from weather stations located at any altitude can be converted into mean sea level pressure. Mean sea level pressure is the pressure your weather station would have if it was moved down to sea-level. Mean sea level pressure is generally higher than your measured pressure, which is called barometric pressure.
Your measured barometric pressure may read 28.62 inHg (969 mb) at an altitude of 1000 feet (305 m), but the published mean sea level pressure by your meteorologist will be 30.00 inHg (1016 mb) at this same location, because the meteorologist recalculated (transformed) your barometric pressure to mean sea-level conditions. This allows him or her to compare this value with weather stations around the world so that high pressure and low-pressure regions, which drive weather condition, can be accurately identified.
The standard sea-level pressure is 29.92 in Hg (1013 mb). In weather forecasts, high and low pressure regions are only relative terms as high pressure is generally considered a region of higher pressure than regions surrounding it and low pressure region has lower pressure than regions surrounding it.
Instructions for most consumer grade weather stations recommend that you to find the closest weather station run by a meteorologist to identify the offset you need to calculate to convert to mean sea-level pressure. Our Mean sea-level pressure calculator calculates this offset for you.
Calculation is based on the following mean sea-level pressure transformation formula:
Correction for atmospheric temperature
Correction for humidity
Correction for asphericity of Earth
Correction for variation in gravity (the 4th therm) was not implemented as it makes a difference of only few 1/100ths of a pascal. For more information and table of variables please check the references below (point 5.)
Article moved from https://barani.biz/apps/sea-level-pressure-advanced/
BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL RAIN GAUGES, WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS