Generation 3 Reference Standard Solar Radiation Shield for Temperature Sensors

Cutaway of the Gen 3 MeteoShield Pro with Vaisala HMP155 temperature sensor and additional temperature probe inside.

Cutaway of the Gen 3 MeteoShield Pro with Vaisala HMP155 temperature sensor and additional temperature probe inside.

Sometimes the best gets better, which is the case with the only helical solar radiation shield for weather station temperature sensors. Listening to feedback from its customers in Antarctica, the Death Valley, and the Sahara, BARANI DESIGN Technologies has brought the last few remaining improvements to the already class-leading helical MeteoShield® Professional.

This new 3rd generation (Gen 3) naturally ventilated solar radiation shield features improved reflected light control from snow-covered or solar-heated ground while maintaining the high air flow rates, which is the number one factor guaranteeing measurement quality. Additionally, solar-powered artificial fan ventilation is available for the rare, less than 0.5 m/s (1.1mph) wind conditions, where all naturally ventilated solar shields show some signs of solar heating.

While these improvements may seem subtle to the naked eye, their combined effect reduces the already class-leading measurement uncertainty in all weather conditions to below 0.1°C, far below even many fan-ventilated solar screen counterparts.

This August in Chicago, BARANI DESIGN Technologies will be exhibiting and looking for B2B partnerships for the USA, Canada, and Mexico markets at the Meteorological Technology World Expo North America. This B2B expo will be at the Stephens Convention Center in Chicago on August 31 and September 1, 2022.

BARANI DESIGN Technologies s. r. o.
Klincova 35
821 08 Bratislava, SLOVAKIA
tel: +421 948 067 125
sales@baranidesign.com

This press release can also be found at: https://www.openpr.com/news/2693549/gen-3-reference-standard-solar-radiation-shield-for-temperature

How tough is the toughest weather station?

When avalanche rescue needs reliable data, only one weather station can send it from under the snow pack with a 12+ km (7.5+ miles) wireless range.

Extreme weather requires tough hardware

In meteorology, the real difference between professional and commercial hardware is not only in measurement accuracy, long-term measurement stability and precision, but also in toughness, robustness and survivability. The fine line between extreme weather and a weather disaster is the damage caused and loss of life. Timely and accurate decisions require accurate and reliable data in the most extreme weather situations. This is what sets apart professional meteorological equipment from the rest and enables the prevention of disasters and loss of life. MeteoHelix IoT Pro weather stations donated to the Slovak Avalanche Service are proving their worth against all existing weather station hardware.

Buried alive under the snow

Buried under wind blown snow pack for over two months at 1727 meters (5669 feet) above sea level, the MeteoHelix kept tirelessly measuring and sending wireless data every 10 minutes to Sigfox gateways installed by SimpleCell and located 12.5 km, 16.5 km, 20 km, and 32,5 km away. The 3+ meter high snow pack here was unexpected in this warmest winter on record.

Over the two months, tons of wind blown snow consolidated and with a crushing force devastated other meteorological equipment. Under this force, the stainless steel mounting bracket holding the MeteoHelix was bent over like a sheet of paper as shown in the accompanying photo. The MeteoHelix survived without damage. After being dug out and over the next two days as temperatures rose above freezing, the snow packed around its sensors from the burial thawed. The MeteoHelix IoT Pro returned to measuring atmospheric temperatures (instead of snow pack temperature) for which it was designed and which it preforms better and more accurately than any other professional meteorological weather station due to its special patented helical solar radiation shield design.

While buried under snow, the MeteoHelix weather station measured snowpack temperature. Around March 13, 2020 (6 days before being dug out) the snowpack temperature became a steady 0°C as the snow started its spring time melt.

While buried under snow, the MeteoHelix weather station measured snowpack temperature. Around March 13, 2020 (6 days before being dug out) the snowpack temperature became a steady 0°C as the snow started its spring time melt.

As soon as the MeteoHelix was dug out, it began measuring solar irradiation and soon after the snow Fell away from its sensors, it began reading the correct air temperatures.

As soon as the MeteoHelix was dug out, it began measuring solar irradiation and soon after the snow Fell away from its sensors, it began reading the correct air temperatures.


COMPTUS Inc. a HUBZone Certified Business Showcases BARANI DESIGN at AMS 2020

MeteoShield® and MeteoWind® 2 weather station sensors at AMS 2020 by Comptus Inc. of New Hampshire

COMPTUS Inc. of New Hampshire, a manufacturer and distributor of meteorological instruments, weather stations and sensors has on display BARANI DESIGN Technologies MeteoShield® Professional, MeteoWind® 2 and MeteoHelix® IoT micro-weather stations capable of meeting strict measurement guidelines of the NWS and WMO for long-term climatic observations of global warming. Known for their quality and affordability, these sensors and weather stations represent the state of the art that the world of meteorology has to offer for synoptic measurement.

Comptus Inc. has stand 341 at the 100th AMS Annual Meeting 14–16 January 2020 at Boston Convention and Exhibition Center, 415 Summer St., Boston, MA, USA.

BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS

BARANI DESIGN TECHNOLOGIES IS A MANUFACTURER OF PROFESSIONAL WEATHER STATIONS AND METEOHELIX PERSONAL WEATHER STATIONS

Other sensors on hand from BARANI DESIGN Technologies will include the precise and robust and MeteoWind® Compact combined anemometer and wind vane with a preliminary MEASNET/IEC 61400-12-1:2017 edition 2 class A = 4.4 and class C = 4.7 along with the MeteoTemp™ temperature and humidity probe for professional AWOS weather stations.